Huaweiy625u32softwaredownload

Huawei Y625 U32 Software Download - How to Update, Downgrade or Reinstall Stock Firmware

The Huawei Y625 U32 is a budget smartphone that was released in 2015. It features a 5-inch display, a quad-core processor, 1 GB of RAM, 4 GB of internal storage, an 8 MP rear camera, a 2 MP front camera, and a 2000 mAh battery. The device runs on Android 4.4.2 KitKat with Huawei's Emotion UI 2.3 on top.

Download: https://t.co/a1BIe8pO8i

If you own this device and want to update, downgrade or reinstall the stock firmware (OS), you will need to download the official firmware file from Huawei and flash it using a tool called Lenovo Downloader. In this article, we will show you how to do that step by step.

Download Firmware for Huawei Y625 U32

Before you proceed, make sure you have a backup of your data, as flashing the firmware will erase everything on your device. You will also need a Windows PC and a USB cable to connect your device to the PC.

First, you need to download the firmware file for your Huawei Y625 U32 from the official source. There are different versions of the firmware available, depending on your region and carrier. You can find the links to download them below:

• (843 MB) - This is the latest version of the firmware for Thailand.

• (756 MB) - This is an older version of the firmware for Europe.

• (824 MB) - This is another older version of the firmware for Thailand.

After downloading the firmware file, you need to extract it using a tool like WinRAR or 7-Zip. You will get a folder with several files inside, including the flash file (.mbn), the flash tool (QcomDLoader.exe), the USB driver (Qualcomm_USB_Driver_Setup.exe), and an instruction manual (How To Flash.pdf).

Install USB Driver for Huawei Y625 U32

Next, you need to install the USB driver for your Huawei Y625 U32 on your PC. This will allow your PC to recognize your device when you connect it via USB. To install the driver, follow these steps:

• Open the folder where you extracted the firmware file and double-click on Qualcomm_USB_Driver_Setup.exe.

• Follow the on-screen instructions to complete the installation.

• Restart your PC after the installation is finished.

Flash Firmware on Huawei Y625 U32

Finally, you are ready to flash the firmware on your Huawei Y625 U32. To do that, follow these steps:

• Open the folder where you extracted the firmware file and double-click on QcomDLoader.exe.

• In the Qcom Downloader window, click on the Load button and browse to the folder where you extracted the firmware file. Select the flash file (.mbn) and click Open.

• Click on the Settings button and check the following options: Download Mode - Upgrade; Reset after Download - Yes; Validate Downloaded ROM - Yes. Click OK to save the settings.

• Turn off your Huawei Y625 U32 and remove the battery. Press and hold the Volume Up button and connect your device to the PC via USB. The Qcom Downloader window should show Connected in green.

• Click on the Start button and wait for the flashing process to complete. It may take several minutes, so be patient.

• Once the flashing is done, disconnect your device from the PC and insert the battery. Turn on your device and enjoy the new firmware.

Conclusion

That's how you can download and install the stock firmware on your Huawei Y625 U32. This can help you to fix any software issues, boot issues, IMEI issues or general damage on your device. If you have any questions or problems, feel free to leave a comment below.